This Ukulele is the last of three instruments I have building together. I promise it will be awhile until I post another. Anyway:
Top - Adi Spruce
Back and sides, Some kind of rosewood.
Fretboard cocbolo
bridge ebony
Binding Australian Blackwood.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Rosewood\Spruce Tenor Ukulele http://www-.luthiersforum.com/forum/viewtopic.php?f=10128&t=44669 |
Page 1 of 1 |
| Author: | johnparchem [ Sun Nov 30, 2014 7:41 pm ] |
| Post subject: | Rosewood\Spruce Tenor Ukulele |
This Ukulele is the last of three instruments I have building together. I promise it will be awhile until I post another. Anyway: Top - Adi Spruce Back and sides, Some kind of rosewood. Fretboard cocbolo bridge ebony Binding Australian Blackwood. |
|
| Author: | SteveSmith [ Mon Dec 01, 2014 7:50 am ] |
| Post subject: | Re: Rosewood\Spruce Tenor Ukulele |
John, that is a super-nice looking ukulele ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | dofthesea [ Mon Dec 01, 2014 10:56 pm ] |
| Post subject: | Re: Rosewood\Spruce Tenor Ukulele |
Nice looking Uke. Cool logo design. |
|
| Author: | Jim Kirby [ Sat Jan 31, 2015 1:25 pm ] |
| Post subject: | Re: Rosewood\Spruce Tenor Ukulele |
John, I'm getting ready to build my first uke - a tenor. What are ballpark target thicknesses for tops (spruce) and backs? |
|
| Author: | Don Williams [ Sat Jan 31, 2015 1:30 pm ] |
| Post subject: | Re: Rosewood\Spruce Tenor Ukulele |
I like it... quite a bit ! Nice work. It does look in shape quite very much like old-school Hawaiian. |
|
| Author: | Allen Ughoc [ Mon Feb 23, 2015 11:06 pm ] |
| Post subject: | Re: Rosewood\Spruce Tenor Ukulele |
Very nicely done! +1 on the logo inlay. |
|
| Author: | Nils [ Mon Mar 23, 2015 1:03 pm ] |
| Post subject: | Re: Rosewood\Spruce Tenor Ukulele |
Well Done! |
|
| Author: | chappy [ Mon Mar 23, 2015 3:02 pm ] |
| Post subject: | Re: Rosewood\Spruce Tenor Ukulele |
I think your back and sides is Macassar Ebony, I have just finished one in that wood and the colours are almost exact. Cheers Alan |
|
| Author: | johnparchem [ Tue Mar 24, 2015 4:47 pm ] |
| Post subject: | Re: Rosewood\Spruce Tenor Ukulele |
Jim Kirby wrote: John, I'm getting ready to build my first uke - a tenor. What are ballpark target thicknesses for tops (spruce) and backs? I am sorry I missed this post. My spruce tops for the tenors were right around 2 mm. |
|
| Author: | Jim Kirby [ Thu Mar 26, 2015 10:16 pm ] |
| Post subject: | Re: Rosewood\Spruce Tenor Ukulele |
johnparchem wrote: Jim Kirby wrote: John, I'm getting ready to build my first uke - a tenor. What are ballpark target thicknesses for tops (spruce) and backs? I am sorry I missed this post. My spruce tops for the tenors were right around 2 mm. Yes, I got past this point already. Rosettes are in, tops are thicknessed, soundhole reinforcements installed and soundholes cut. It remains to be seen if I'm building ukes or defectively small guitars. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|